Sun J., Wang Y., Wang L., Wang H., Wang H., Wang Q., Dai Y., Wang D., Hu X., Liu J., Zhang Z., Liu H., Cui C., Qin L., Wang K., Zhou B., Sun W., Xiong W.S.
Ключевые слова: high field magnets, coils outer, LTS, coils insert, HTS, YBCO, GdBCO, coated conductors, insulationless, coils pancake, design parameters, fabrication, magnetic field density, test results
Ключевые слова: high field magnets, LTS, coils outer, HTS, coils insert, insulationless, coils pancake, REBCO, coated conductors, fabrication
Ключевые слова: HTS, GdBCO, coated conductors, coils pancake, insulationless, screening current, magnetic field dependence, heater, numerical analysis, experimental results, screen
Ключевые слова: HTS, tapes, laminations, fracture behavior, crack formation, electromagnetic forces, modeling, numerical analysis
Ключевые слова: HTS, coated conductors, mechanical properties, films, substrates, laminations, thermal stress, electromagnetic forces, modeling, numerical analysis, delamination
Ключевые слова: HTS, SmBCO, films, oxygenation treatments, CVD process, laser application, substrate LaAlO3, films epitaxial, X-ray diffraction, Raman spectroscopy, microstructure, growth rate, resistivity, temperature dependence, critical temperature, critical caracteristics, critical current density, current-voltage characteristics, experimental results
Ключевые слова: fusion magnets, quench protection, dynamic operation, measurement setup, measurement technique, loads, numerical analysis, facility
Ключевые слова: quench protection, measurement setup, discharge characteristics, magnets, loads, circuit breaker, inductance, current waveforms, capacitor, resistor
Ключевые слова: fusion magnets, quench protection, modeling, recovery characteristics, numerical analysis
Ключевые слова: fusion magnets, quench protection, discharge characteristics, design, resistance, deformation, thermal properties, modeling, resistor
Ключевые слова: fusion, quench protection, discharge characteristics, protective system, comparison, design, current waveforms, inductance, resistor, experimental results
Ключевые слова: HTS, REBCO, coated conductors, winding techniques, mechanical effects, CORC cables, critical caracteristics, critical current, degradation studies, numerical analysis, tapes, width, thickness dependence, substrates, twist-pitch, helical winding, angular dependence, strain effects, geometry effects
Ключевые слова: ITER, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, jacket, mechanical properties, China, tensile tests
Liu B., Jin H., Wu Y., Liu S., Long F., Liu F., Jin J., Wang K., Su C., Qin J.-G., Liu H.-J., Yang Z.-Y., Pang Y.-C., Wei Z.-R., Xue T.-J., Li H.-W., Niu E.-W.
Ключевые слова: China, ITER, status, fabrication, coils toroidal, coils poloidal field, central coils, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, critical caracteristics, jacketing, mechanical properties, composition
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.